Refinishing Decision and a Cane Chair

I need to stop looking on Craigslist or I need a workshop! I see quite a few things that I would love to purchase but I have no where to store anything. As it is my den area looks reminiscent of a Sanford and Son episode. I mentioned earlier that I purchased a Henredon Table and 10 Henredon chairs off of Craigslist. I had the table and chairs outside ( shaded area) for about a week until I could make room for them in my garage but then it rained. Yes, it rained in San Diego in September. Thankfully one of my daughter's friends was getting picked up right as it started and her dad helped me get everything inside. I love the table and I have been afraid to start the refinishing on it. I contacted Henredon to see if I could get any information on the table and chairs. I sent them a picture and the numbers that were under the table. They got back to me the next day and they told me the table was from their Capri collection manufactured between 1968 and 1976. The table and the chairs are solid pecan wood and the table has a cherry veneer facing. It was so neat to be able to get that information but they stressed not to use harsh refinishing products on the table. I have been flip flopping back and forth as to what exactly I would like to do with the table. My plan was to refinish the table top with a wood stain and paint the table legs white like my Oak table however, I am starting to really love the warmth of an entire wood table offset with white chairs. This is a bit of a problem, if the table top was in great condition I would just leave it as is, even though it is has the speckled finish it is actually nice looking.  There is no way I would be able to match a stain so I am contemplating trying to refinish and entire table. I know it can be done with time and patience's. I would love some input on this.

I started to strip off the caning from one of the chairs, which is a LOT of work. In a perfect world all the chairs cane backs would have been perfect but many were broken. I really had hoped the captains chairs would have been intact but they were not. I plan to recane just the captain's chairs and then upholstery the other chairs. So much work but the whole set was $95, and I know I will enjoy working on it. Here is the picture again for reference:

Well prior to finding the Henredon I bought the oak table and I found other cane back chairs. I finally got around to competing one of those chairs. I am happy with how it turned out. I used Annie Sloan's Paris Gray and Old White but instead of mixing the two colors together I dipped the end of the brush in each color. I used clear and dark wax and did a light distressing. I covered the seat using a canvas drop cloth. I did not sew the seat the way it was but I do plan to do that with the Henredon Chairs..

I would really love your feed back and input as to what I should do with the Henredon table, should I go with my original plan of refinishing the tabletop and painting the rest white, or go with what I am being drawn to know a whole refinished table look? Do you have any experience refinishing an entire table and if so what advice would you give?

Here is the before picture of the random cane chair I have:

                             and the after                          

Linking:

http://missmustardseed.blogspot.com/

French Inspiration Table.

I bought this table about 2 weeks ago. This table was purchased primarily because I needed chairs for the oak table. When I saw the picture on Craigslist, I was keeping my fingers crossed that this table was a good quality table. The reason being is in my "design wishlist" is this picture:

I love this table and it is one of the reason why I refinished the oak table in the way that I did. When I actually went to pick up the table it was a so-so quality but it came with the chairs.  Now, just a few days later I came across another table and chair set. This time it was a Henredon table with 10 chairs for $95.00. I couldn't refuse, this was the quality and style that I wanted. The Henredon table is of course done in the speckled finish, so there will is ANOTHER table in my future. Here is a picture of the Henredon:

Can you believe it, it is beautiful and it looks like my dream picture (almost)!

Okay so on to the so-so table, this is a project table for me. I am not sure what I will do with it, maybe try and sell it to at least get my money back. My idea for this table was to first do another refinish on it to get practice for the Henredon table but as I said this table was so-so quality and as I stripped it it showed. On to the next plan do a washed finish on top using Old White, then clear and dark wax like One Nutty Girl. It didn't work out so well for me. Okay on to the next plan, paint the table top in Annie Sloan Graphite. Graphite was not my favorite to work with. It shows so much dust and such as I was painting and looked so dull even after waxing. I was also having an issue with the previous wax (from the white-wash technique) I had put on the table. I know you can paint over the wax with this paint but I wonder if I was suppose to do something first. I did try wiping as much of it off as I could.  Anyways, once I added the dark wax it made a world of difference. I don't know if this is a good thing or not but if I had to describe the look of the table top I would say worn leather. It really has a faux leather look to it and I  like it. I would like to see a piece in person painted by a professional ASCP expert to see the finish. If I had t guess, mine is not how it should be.  I painted the base of the table Paris Gray (love Paris Gray!!), waxed in both clear and dark wax. When I went in with the dark wax I wasn't loving how dark it was so I mixed up the wax with a little bit of mineral spirits and it seemed to go on not as dirty looking and was easier to wipe off. I am still working on the chairs which will go with this table. I don't need them now, that I have 10 Henredon chairs. I am a little nervous about trying to finish the Henredon table because I know at one point this table cost a lot. Well I hope you enjoy my project table. If you have any tips on painting after having waxed please let me know.

Here are the Beauty Shots!

Table Before

Linking to:

Just a Little Blue!!

When I started this journey (painting furniture) a few weeks back I purchased a very old secretary off of Craigslist. I bought it from a girl who had just moved to Ocean Beach from out of town. When I saw the posting for this she was asking $20 for it, which was within my budget. I was so excited because I could tell it was a very old piece but when I went to pick it up my excitement fizzled. It was in fact old and but it showed. It had a separation of the wood straight down on the side (plus other stuff) and it was actually smaller then I had expected. The girl told me it was her grandmother's and that her grandmother used to pay her bills on it. I loved that history and for $20 bucks I decided to take it. For the last several weeks I have just stared at it wishing I hadn't bought it. It was pretty beat up for my skill level.  I spoke with a wood guy and he said the type of separation in the wood was not really fixable. So I just left it and got to work on my chair, and then my table. My table needs a few more coats of poly but it has been so hot that I haven't wanted to mess with the poly drying to fast. In the meantime I decided to do something with the secretary. I had a vision in my head and have really loved the French Images from The Graphic Fairy. I wanted to put a graphic on the front and on the inside of the secretary. The funny thing is when I went to check out her blog, there was a vintage secretary that did the same thing! Well, I had to figure out how to get that image onto the secretary and saw that it mentioned a Modge Podge technique. I printed my images, this one for the front and this one for the inside. I wanted to paint the outside of the piece Paris Gray and the inside Aubusson Blue (Annie Sloan Chalk Paint). I painted the inside first and then started on the outside but it wasn't looking right. The two colors weren't working that well together and the Paris Gray didn't look like I had thought. I continued painting until the whole secretary was finished. It was getting late and I had things I need to get done so I started to clean up. As I was cleaning up, I spotted a paint can and was like "which one is this" I took a look "uh-oh, Paris Gray, oh-no!" running outside "what have I been paint with??, Are you kidding me, DUCK EGG BLUE!!!" Yup, I painted the whole thing Duck Egg Blue, which would explain why Paris Gray just didn't look right. I AM NOT EVEN COLOR BLIND!! The crazy thing is, it wasn't until I read the words Duck Egg Blue that I saw it as blue... geez! It is a good example of how the brain can trick you. The next day, I got to work and re-painted again with Paris Gray. This time the Aubusson Blue looked beautiful! The two colors were working so nicely together... more work but I was happy! I left the desk to dry and waxed and worked on my images. I woke up this morning and well the Modge Podge thing didn't work out so well. The imaged is still on the inside but there isn't one on the outside anymore. I found Red Hen Home blog and she used a projector, my hubby has one so in the future this will be the technique I will use. I really wanted the modge podge to work because it seemed so easy. When I look at others who have used this technique I don't see any paper left but mine had paper still. Any tips?
I didn't mention it above but with the secretary I just filled in the split wood with wood filler and nailed it together where I could. You can see a line but that is okay.
Here are the pictures of my Secretary. I am still trying to figure out waxing with both clear and dark wax as well as the distressed look. I want it to look naturally distressed and in some areas it does look like that but in others not so much. I would love your feed back and tips. Currently I have Annie Sloan's clear wax and Fiddes and Sons Clear and Ruggar Brown wax. Okay while on that topic, I want to give a shout out to John Millen Hardware who I bought the waxes from on recommendation from Miss Mustard Seed. I ordered it and it was to me in 2 days!
I am still trying to figure out linky party etiquette so if you could also give me some tips on that I would appreciate it!

Paris Gray's feeling a little Blue!

Mommy's helper!

Thank you for looking!



                                                                         Linking to:

 

 

My First Reupholstery is DONE!!!

I don't know how all the DIY'ers do it. I am amazed at how many projects they have done and seem to do overnight. Me, well my little project turned into what seemed like forever. I painted, repainted, and then started the upholstery part but with my weak wrists stapling became a "wear your brace, take three Motrin's and check back in the morning" kind of  deal. My husband already had a manual staple gun but I knew I would need something with a bit more power so I purchased an electric stapler. For every 10 staples I shot, 8 of them had to come out. I also couldn't hold the fabric tight and hold down the gun very well. I was so frustrated after all that I have put into this project to come to this road. Hubby called me at the tail end of my discovering I just couldn't do it with the tools that I had. I broke down in frustration telling him my woes and the fact that I have discovered from various blogs that pneumatic is the way to go. Bless his heart, he said "well, I guess you will have to get one".  So with hubby's go ahead I went out and purchased a pneumatic upholstery staple gun and air compressor. I first purchased one from Home Depot (just a basic pneumatic stapler) but it had way to much power and shot those staples clear to the other side. That just won't do so I did a search and it seemed that upholstery guns need to be purchased online. I kept searching and actually found a local tool store that had one in stock. I immediately returned the first gun back to HD, and then bought the upholstery gun from Tool Up. The night before when I had the first gun I found this post about Upholstery Basics:Tool Time which walks you through getting your air compressor and staple gun all hooked up. I have to say the instruction manual for the air compressor scared me crazy and I feared I would get blown up. So see this post it took the scary away (sort of) and I followed those instructions again with my new staple gun. I immediately noticed a difference with this gun, the size was more comfortable and I could just tell this was the right one. The first time I shot a staple through the upholstery gun it was such a huge difference, it had just the right amount of power to drive the staple into the wood with out blowing through the wood. With in 10 minutes I had the back of the chair completed and was so happy, I had to run in the house and give hubby a big kiss!
I still needed to pull the fabric tight but no pressure on my wrists while stapling. The next night I worked on the base of the seat and it isn't perfect but for my first upholstery project I think I did really well. I used gimp to cover the staples and I burnt burnt the heck out of my forearm with the tip of the staple gun..ouch!! I do believe is going to scar. I have to say with all the trial and error my first project was a success. I do cringe at the fact that I have a whole other chair like this one to complete. The actual painting an reupholstery was not biggy compared to removing the original fabric. This was a big, big pain! I am trying to decide if I want to do the chair exactly the same or completely different. I currently don't have a spot for them in my house so these are just for fun projects.
I also have 4 dining chairs to start on, these will be a much easier project with just a base seat.
I wish I could update you with something positive about my dining table but this project has become worse and worse. It seemed like everything was going great but when I applied the stain it went from bad, to really bad. I talked with someone at a wood shop and they said I needed to re-sand the table. This is not going well at all. I will be taking the table leaf to the store to see if this is salvageable or if I just need to scrap it. Good thing it cost only $25 dollars. Of course that is not factoring in the cost of supplies.. I will update later! Here are the pictures of my chairs! I mentioned it in this post, but my inspiration was from Marian from Miss Mustard Seed, she is amazing and with how busy her blog is she was responded to my email so quickly. That made my day, well that and my finished chair!! Paint colors used: Old White as base, Duck Egg Blue all over, Paris Gray dry brushed, and clear wax

Dining Table Progress and a Sneek Peek!

I have two trains of thought right now. First is, if they can do it so can I and if I can do it anybody can do it! Let's add one more thought, "they make it look so easy and it's not!" The last few days I have been paint one of the Craigslist chairs I purchased. This chair has gone through quite a few changes. I first decided to paint the chair white, distress it, and wax it with both clear  and dark waxes. I only got to the clear wax and I kept looking at the chair with the "not sure" look. I love the white chair look however I felt like it need something else. I went hunting for more "drop cloth inspirations" and happened upon the fabulous Miss Mustard Seed blog and this french chair and the paint technique she used to achieve the look. I also found Little Place Called Home Sweet Home who used this same technique on a chair she had. What I really appreciated about LPCHSH's chair is she used what she had. She mixed a little paint here and there and came up with colors to achieve this look. I also posted a question on her blog and she responded right way, which really impressed me. So on to my chair, I invested in 4 Annie Sloan Chalk paints and really could not see my self spending any more money on paint. So working with what I had, I painted over the white with the Duck Egg Blue, let it dry, dry brushed Paris Gray, distressed, wax with clear, waxed with dark wax, showed it off to my hubby, kissed hubby as he headed off to bed, sat down looking at my chair for a half hour, and yes I picked up the paint brush again. It wasn't perfect! The dark wax gave it a more aged yellow look then the lovely antique look and the distressing had a hard look to it. So,  I opened up more Old White and dry brushed it, and wiped it off, distressed in some areas just until the white underneath showed, then sat back and knew it was finished!!!

Yesterday I started to work on reupholstering the chair. I have read many times over that any staple gun other then a pneumatic stapler is a waste of time, however after looking at some pricing on the whole thing (air compressor + staple gun) it didn't seem like an option. Plus, not everyone who does a reupholster job has a pneumatic, right? I went out and purchased an electric staple gun and got to work. Well for every 5 staples I shot, 4 of them I took out. Not only that but I couldn't pull the the fabric taut enough and get enough strength to staple. Now figure in the fact that I have weak wrists, I have tendinitis pretty bad (at times) in my left wrist, mildly in my right. I have been dealing with this for a couple of years and there really isn't much that can be done. Not only that but when I have gone into the Dr's. since my tendons don't swell up like the typical swelling they look at me like I am crazy. Top that off with the fact that the last flare up (the time before yesterday) I had was so bad they gave me Vicodin (can't take it) for the pain, something with that flare up did something and since then I have a constant dull (very manageable) ache and noticeable weakness in my wrists, who knew being a DIY required first-aid...haha! Okay I digress, but needless to say last night I started my regiment of Motrin, ice, and brace. So frustrated! I just can't handle the upholstering with weak wrists and a staple gun that needs strength and might! I complained to hubby, God love him and all is support of my various projects! Well, I think we will be getting the pneumatic staple gun. Until then my chair/s are put on hold, but I did want to show off a sneak peek of my paint job. I am pretty happy with the results and hope I can get to upholstering them soon.

What's a girl to do when she has the DIY bug and her project is put on hold? She starts another. I bought a table off of Craigslist for $25 dollars and started sanding it down, but I ended up putting a Varnish Stripper on it since sanding the edges has proved more difficult. With the sanding I got most (if not all) of the varnish off but wanted to make sure. I sanded the table and leaf on Friday night, added the stripper to the table yesterday (leaf today) and will sand and apply stain at some point this week. My older daughter has been on a mission trip to Israel since June 22nd, and comes home on Wed. (so happy!) so DIY will be put on hold when she is back.  In my search of table "how to's" I have found First Come's love and her table. I posted a comment and she responded right way. I am using her tips with my table.. Here are some pictures of my progress thus far.

Table top!

Leaf with Stripping Gel

My supplies!

Until next time!